Sinclair ASH-18AIN PT, User Manual, Page: 4 / 25

◆
Use and Maintenance
——
Precautions on Use
Carefully read following precautions before use
Warning
★
In case of abnormality (e.g.
burnt smell), please cut off the
power supply immediately and
then contact SINCLAIR
Authorized Service Center.
★
Never operate the air
conditioner with wet hand.
★
Please do not cut or damage
the power cords and control
lines. Damaged power cords
and signal control lines of the
air conditioner must be
replaced by professional
technicians with special cords.
If abnormal state continues, the
air conditioner may be damaged
and even worse, electric shock
or fire might be caused. Otherwise there is risk of electric
shock.
★
To avoid fire, be sure to use
special circuit for power
supply.
★
Disconnect the power supply if
long putting the air conditioner
out of use.
★
Never damage the cable or
use unapproved cable.
Otherwise it might cause electric
shock or fire. Otherwise accumulation of dust
might cause heating or fire. Otherwise it might result in cable
overheating and cause fire.
★
Please turn off the power
before cleaning the air
conditioner.
cut off the
power
Otherwise it might cause electric
shock or injury.
★
Rated voltage of this air
conditioner 220-240V~,with
a tolerable fluctuation at 10%.
The compressor will vibrate
sharply if the voltage is too
low, resulting in damage to
refrigerating system. Electrical
elements are easy to damage
if the voltage is too high.
★
For power supply, be sure to
use special circuit with air
break switch of sufficient
capacity. The air conditioner
can automatically start or stop
according to your
requirements. Please do not
switch on or off your air
conditioner too frequently;
otherwise negative impacts
will be caused to the air
conditioner.
- - 1