Sinbo SS 4033, Instruction Manual, Page: 7 / 40

IMPORTANT NOTICE
Please read all the instructions carefully before start using the shaver.
Items contained in this package: shaver, gift box, charging cord, cleaning brush, operating
instructions
Before each use, always clean your face thoroughly. This will give a better shaving
performance and is more hygiene while causing less contamination to the shaver.
1. Before first using the shaver or when it has not been used for a long time, please make
sure the shaver is charged properly before use.
2. Use only the charging adapter that is provided by the manufacturer.
3. Never clean the shaver with water that can cause damages to the appliance.
4. Do not unplug the charging adapter with wet hands to minimize risks of electric shock.
HOW TO RECHARGE
1. To promote the shelf life of the shaver, it is highly recommended
to recharge your appliance only after the battery is completely exhausted.
Otherwise you must discharge the appliance before your charge it.
(To discharge, turn the shaver on until its battery has run down.)
2. Please check the power supply before recharging the shaver. The
standard voltage is AC230V, 50Hz, 2W.
3. The shaver should not be recharged under temperature of 5-35˚C.
4. For safety purpose, please make sure both the shaver and its power
socket are completely dry before recharging.
MAINTENANCE AND CLEANING
1. Regular clearing will keep the shaver in good condition and maintain
its cutting performance.
2. Unplug and turn the On/Off switch off. Remove the cover and detach
the outer foil hood.
3. Carefully clean the outer foil, inner blades and shaver body with a
cleaning brush.
Caution! NEVER clean the shaver with water.
4. Hold firmly at both ends (1) (2) of the inner blades and pull upward
to detach the blades.
5. Hold both ends of the new inner blades and press downward until
it snaps into the shaver.
- 6 -