Sinbo SK 7305, Manual

Page: 9 / 20

- 8 -
• If the kettle is overfilled, boiling water may be ejected.
• The kettle is only to be used with the power stand provided.
• Use the appliance only with its power stand.
• Do not immerse the appliance in water.
ATTENTION: Do not remove the lid during boiling.
Before using it again wipe the bottom of the appliance.
SAVE THIS INSTRUCTION MANUAL.
HOUSEHOLD USE ONLY
GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug. (3 pins) If the
plug does not fit fully into the electrical outlet contact a qualified electrician. Do not
modify the plug in any way nor use an adaptor.
PARTS OF THE APPLIANCE
1. Lid, 2. Water level indicator, 3. Handle, 4. On/Off switch, 5. Base unit (Power cord)
BEFORE FIRST USE
• Read all instructions carefully and keep them for future reference.
• Remove all packaging.
• Water boiled for the first time should be discarded.
• The filter has been installed on the kettle before shipping. If it has been removed, install
the filter before using the kettle. Hold the filter securely and place it into the slot in the
filter over the tab in the cover. Push gently and the filter will latch into its position.
- Do not use the kettle without placing the filter in its position as water may spill out
when boiling.
- Do not remove the filter when the kettle is hot.
• Fill the kettle with the required amount of water without exceeding minimum and
maximum levels indicated on the water level window.
Note: Do not attempt to fill the kettle while it stands on its power base.
Do not use it except for boiling water. Any other liquids will contaminate the interior of
the kettle.
Do not fill past the MAX level indicated on the water level window. Overfilling may cause
water to spill out when boiling..
• Place kettle on the base making sure it is correctly engaged on its base.
• Switch the On/Off button to ON. The indicator light will be on showing the kettle is in
boiling process. When water boils power switch and the indicator light will automatically
switch OFF.
• If you want to use the kettle again, allow the thermal safety switch to cool down for 15-
20seconds then turn the power switch ON. If the power switch does not remain in the
‘On’ position, the water is hot enough to use without reheating.