Sinbo SHD 2688, Instruction Manual

Page: 11 / 32

- 10 -
• Do not leave the appliance switched on top of any surface.
• Do not use the appliance where aerosols are in use.
• Do not position the hot parts of the appliance on heat-sensitive surfaces.
• The appliance heats when in operation.Do not bring the hot parts into contact with
the skin to avoid burns.
• Never leave the appliance connected to the socket.
• Never put the appliance away when it is still hot or connented.
• No liability is accepted for damage caused through inappropriate handling or use
other than that stipulated in this manual.
• Never wrap the cable around the appliance when it is still hot.
Instructions for Use
• Connect the appliance to a socket.
• Operate the start/stop switch
• The hair straightener has a built-in ceramic PTC system to keep the temperature of
the ceramic plates constant.
• In order to straighten hair perfectly,take a strand which is not too thick.
• Starting at the root,place it between the plates in a perpendicular position and gently
pull downwards until reaching the ends of the strand. If necessary,repeat this action
various times.
• Apply the same technique to the rest of the hair.
• When finished,disconnect the appliance by putting the switch in the stop position and
unplug it from the socket.
Cleaning
• Disconnect the appliance from the mains and leave to cool before proceeding to clean.
• Clean the appliance with a damp cloth and dry afterwards.
• Never submerge the appliance in water or any other liquid or put it under running water.
• Do not use solvents or abrasive products for cleaning.
Problems and Solutions
Should the mains connection fail,do not try to replace it since this is potentially
dangerous.Take the appliance to an authorised Technical Support Service.The same
applies to an other type of problem.
Technical Details:SHD-2678&SHD-2679
• Power supply:AC 230V 50Hz
• Average power consumption:35W
• Temperature rise time:≤5minutes.