Sinbo SHB 3111, Instructions For Use Manual

Page: 13 / 32

- 12 -
BEFORE FIRST USE
After removing the package, remove the appliance parts before utilization. For instructions,
see “REMOVING THE PARTS OF KITCHEN ROBOT”.
Excluding the motor body, wash all parts with soapy water. Rinse and dry.
DO NOT SUBMERGE MOTOR BODY INTO WATER.
INSTALLATION
Installing the Chopper
1. Align the motor mill on the motor body.
2. Align the Bowl with the Motor mill and place it on the motor body by turning it clockwise.
3. Place the blade adapter on the motor mill.
4. Place the chopper on the blade adapter.
5. Bring the chopper to the right position.
6. Close the bowl cap and turn it clockwise until the cap locks onto the bowl.
7. Place the pushing gavel to feeding funnel.
Material Amount to be used in single operation
Chocolate
≤
100g
Cheese ≤ 200g
Meat
≤
500g
Tea or Spice 50~100g
Fruit or Vegetables 100~300g
Onion ≤ 500g
Notes (Chopper):
- Place the chopper in the bowl before placing the materials.
- To avoid over-processing the materials, adopt momentary operation. Do not utilize the
appliance for an excessive duration when processing hard cheese or chocolate. Otherwise
the materials will heat up and melt.
- Standard chopping duration: 30-60 secs.
Placing the Kneading Disk
1. Align the motor mill on the motor body.
2. Align the Bowl with the Motor mill and place it on the motor body by turning it clockwise.
3. Place the blade adapter on the motor mill.
4. Place the kneading disk on the blade adapter.
5. Bring the kneading disk to the right position.
6. Close the bowl cap and turn it clockwise until the cap locks onto the bowl.
7. Place the pushing gavel to feeding funnel.