Sinbo SFH 6927, Instruction Manual, Page: 5 / 12

CLEANING THE HEATER
1. Always un-plug the heater from the wall socket and allow it to cool down before
cleaning.
2. Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
3. Do not use any detergents or abrasives and do not allow any water to enter the heater.
STORING THE HEATER
When the heater is not used for long periods of time it should be protected from dust
and stored in a clean dry place.
INFORMATION ABOUT USAGE FAULTS
Only use the specified voltage for the appliance. Check with your local voltage to see if
they match. To avoid any risk hazards, a damaged power cable must be changed by the
manufacturer, service organization or a likewise qualified technician. Do not attempt to
disassemble the device yourself in case of a failure, contact our call center.
Do not attempt to repair the device yourself. Doing so will void your warranty and our
company will assume no responsibility for resulting failures.
WHILE HANDLING
• Do not drop the product,
• Ensure it does not suffer impact,
• Ensure it doesn't get crushed or squeezed,
• Observe the marks on the packaging.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They can
take this product for environmental safe recycling.
- 4 -