sinaCam HDC1-D, Quick Start Manual

Page: 10 / 16

Installation sinaCAM
10 Rev.: 1.2 (A) Quick Start Guide
7. Installation
7.1 Minimum System Requirements
Shooting with sinaCAM requires the below listed minimum equipment:

A sinaCAM camera system, consisting of
– sinaCAM base unit
– one or two sinaCAM remote heads (depending on shooting in 2D or 3D)

Further equipment, like
– C-mount lens suitable for 2/3 ” CCD cameras
– Remote head cable, 75 ohms coaxial cable with BNC plugs
– Video output cable for DVI and/or HD-SDI
– Digital HD monitor, able to display the desired output format and
frame rate
– Digital recording device
– DC power supply for the sinaCAM base unit
7.2 Power Supply
It is recommended to only use official sinaCAM accessories as a power supply.
 For official sinaCAM accessories please refer to www.sinacam.eu
CAUTION
The use of a wrong power supply can cause fire or electric shock.
NOTICE
The use of a wrong power supply may cause damage to the camera system.
7.3 Remote Camera Head Connection
The base unit supplies 18 V power to the remote camera head terminals 1 and 2.
NOTICE
Connect only sinaCAM remote camera heads to terminals 1 and 2 of the base
unit. Connection of any other equipment to terminal 1 or 2 may not only
cause damage to the camera system, but also to the connected equipment.
7.4 Connecting the Hardware
 Make sure that all hardware to be installed is switched off.
 Connect all hardware to the base unit.
 Switch on all hardware and the base unit.