ROBO LED
LHT1083
Single 18W LED PIR Floodlight
INSTALLATION INSTRUCTIONS
This product is suitable for use only with a supply voltage of 220-240V AC, 50/60Hz.
All electrical work must be carried out in accordance with local and national electrical codes as applicable.
We strongly recommend that this light fitting is installed by a registered electrician.
Always switch power off prior to installation. A means of mains power isolation must be installed in the circuit
for the purpose of safe access for any internal cleaning, recalibration, or maintenance.
This light fitting is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Young children should be
supervised to ensure that they do not play with the appliance.
Any changes or modifications made or attempted to this product, or product installed contrary to these
installation instructions without the prior written approval of the manufacturer, will void any and all stated
warranties.
The light source of this luminaires is not replaceable; when the light source reaches its end of
life, the whole luminaire must be replaced
IMPORTANT
!
Thankyou for purchasing this Robo LED light fitting.
This product is suitable for sheltered exterior locations. It requires a 230V AC power
supply to operate and should be installed by a registered electrician.
TECHNICAL SPECIFICATIONS
Power Source
220-240V AC
Rated Load
18W
Lumens
1100 lm
Colour Temperature
4000K
Detection range (approx)
Max. 10 metres at 270°scan
Fixed Time on Adjustment
3(±1) minutes.
Pr
otection Rating
IP44
Mounting
Wall
Construction
UV-stabilised polycarbonate
Safety Class
I
Warranty
3 years
