Hz Key Chain Transmitters 2 and 4 channels
Read all instructions carefully before use.
Hz Key Chain Trans
®
Programming Instructions
REPLACING THE BATTERY
LOCKING/UNLOCKING TSA 4
A - Enabling the locking function - Once a locking code has been entered the TSA 4 will automatically lock the buttons after 2
minutes without a command to prevent unintended operation. The buttons can be unlocked as per section B.
1) Press the lock button
for 5 seconds
2) Enter a 4 key code
3) Validate the code by
pressing the lock button
4) Enter the same 4
key code again
5) Validate the code by
pressing the lock button
ATTENTION - The battery must be installed correctly with regards to the polarity. The battery must be installed with the + side facing away from the
transmitter board. Do not expose battery to high temperatures or water. Do not throw batteries in fire or water. Dispose of batteries correctly
B - Unlocking the remote - After unlocking the remote, the buttons will remain active for 2 minutes before locking again.
1) Enter your 4 key
code
2) Validate the code by
pressing the lock button
3) The transmitter buttons are unlocked for normal use for 2 minutes.
After 2 minutes the transmitter will automatically lock the buttons again
C - Disable the automatic lock function
1) Press the lock button
for 5 seconds
2) After 5 seconds the locking
LED will go out. The locking
Function is now disabled.
