2
SIMTECH
Phone: 877-777-2467 • Fax: 215-547-9129
www.SimtechUSA.com
1.081210
Weld
Tech -
Hand Held Socket Tool
Safety Rules
The use of electrical components is always a potential danger. In order to avoid any kind of accident
caused by electrical sources it’s strongly suggested to read and follow carefully the following safety
rules before operating the machine.
The working area must be clean.
•
Do not use machine in rain, inclement weather or close to flammable liquids.
•
Always use the machine in a fixed and safe position.
•
The machine is operated by 110 Volts therefore be sure that the power supply plug is
•
supplied with the safety devices according to the standard requirements also check
that the power supply will be on the range of maximum 10% of the machine’s nominal
tension.
Regularly check the cables and the plug. If the cable needs to be replaced, please contact
•
factory.
Never unplug the power supply by pulling the cable.
•
Never carry the machine by the cable.
•
Before using the machine, always check that the handle is dry.
•
The heater is extremely hot, it’s strongly suggested to use suitable gloves.
•
Before packing away the machine, wait for the complete cooling of the heating surface.
•
Description
The Simtech portable socket fusion machines are available in two size ranges ½”-2” (20mm to
63mm) and ½” – 4” (20mm to 110mm) in both IPS and metric sizes. Each unit come completes with
an electric heating plate, digital temperature controller, durable plastic handle, two position metal
bench mounting bracket and heater stand. The unit also includes a side handle handle attachment
and heater bushing tools. A convenient carry case provides protection and safety while not in use.
½”-2” Tool is 110v / 800 w
½”-4” Tool is 110v / 1200 w
220v Avaliable upon request
