Smart Machine Smart Decision
SIM800 Series_Bluetooth_Application_V1.02
12
2014-06-30
2.5.
AT+BTUNPAIR Unpair BT device
AT+BTUNPAIR Unpair BT device
Response
+BTUNPAIR: (
list of supported
<device ID>
s
)
OK
Test Command
AT+BTUNPAIR
=?
Parameter
See Write Command
Response
OK
Write Command
AT+BTUNPAIR
=<device ID>
Parameter
<device ID>
Paired Device ID.
0 delete all the paired device
1 delete the the paired device corresponding to ID
2.6.
AT+BTSCAN Scan surrounding BT device
AT+BTSCAN Scan surrounding BT device
Response
+BTSCAN: (
list of supported
<switch>
s
), (
list of supported
<Timer>
s
)
OK
Test Command
AT+BTSCAN=?
Parameters
See Write Command
Response
OK
If BT device scanned:
+BTSCAN: <status>,<device ID>,<name>,<address>,<rssi>
If terminate:
+BTSCAN: <status>
Wrtie Command
AT+BTSCAN=<
switch>[,<Timer
>]
Parameters
<switch>
1 start
0 stop
<status>
0 BT device found
1 scanning finished
2 scanning stop
3 scanning failed
<Timer>
scanning time 10-60s
<device ID>
BT device ID scanned
<
name
> BT device name
<
address
> BT device address
