IC RSS-GEN, Sec 7.1.2 Warning Statement- (Required for Transmitters)
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
IC RSS-GEN, Sec 7.1.2 Warning Statement- (Required for Transmitters w/ detachable antennas)
The radio transmitters 768C-NKE2103, and 768C-NKE2254 have been approved by Industry
Canada to operate with the antenna types listed below with the maximum permissible
gain and required antenna impedance for each antenna type indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
System
Model
Transmitter
Antenna part number/
description
antenna gain
(dBi)
impedence
(nominal)
TXL-10S-4
768C-NKE2103
151-10359-001 - 4 foot antenna 27.9 dBi
50 ohm
TXL-10S-6
768C-NKE2103
151-10360-001 - 6 foot antenna 29.9 dBi
50 ohm
TXL-25S-7
768C-NKE2254
151-10361-001 - 7 foot antenna 30.7 dBi
50 ohm
note:
only the antenna and transmitter pairing shown in table above may be used.
IC RSS-102, Sec 2.6 Warning Statement
The user manual of devices intended for controlled use shall also include information
relating to the operating characteristics of the device; the operating instructions to ensure
compliance with SAR and/or RF fi eld strength limits; information on the installation and
operation of accessories to ensure compliance with SAR and/or RF fi eld strength limits; and
contact information where the user can obtain Canadian information on RF exposure and
compliance. Other related information may also be included.
