Simrad TV80, Reference Manual

Page: 123 / 306

406388/B
121
8 Choose the communication channel.
This is specially important if you wish to use several sensors to operate on different
communication channels. This is also important to avoid interference if several vessels
equipped with identical catch monitoring systems are operating simultaneously in
the same area.
9 Select
Program Sensor
.
The currently selected parameters are “sent” to the sensor.
Result
The new sensor appears on the
Sensor List
page.
The
Sensor List
page presents a table with all the catch monitoring sensors that have been
added to the system. You can see if they are currently in use or disabled. You can also
see relevant information about the sensors, such as type, receiver in use, communication
channel, and where they are placed on the fishing gear.
Related topics
PX TrawlEye Configurator dialog box, page 229
PX MultiSensor mk2 Configurator dialog box, page 236
Main PX Sensors configuration parameters, page 264
Specific configuration parameters for PX TrawlEye sensors, page 267
Overview of sensors channels and frequencies, page 269
Adding more measurements to a PX MultiSensor mk2
The
Unlock measurements
dialog box allows you to unlock extra measurements you want
you PX MultiSensor mk2 to make.
Prerequisites
The
PX MultiSensor mk2 Configurator
dialog box is only available if there is a PX
MultiSensor connected through an SR receiver unit. If you wish to make more than two
measurements with your sensor, an additional license is required. In order to obtain a
license, contact your local dealer.
Context
By default, a PX MultiSensor mk2 can always send 2 measurements. Additional
measurements (up to 3) can be added.
You need a special interface unit or cable to do the configuration task yourself.
Operating procedures