2 |
S-band HSC SRT Adapter Box |
Installation Guide Addendum
Installation instructions for SRT adapter box
S-band HSC 12 feet array
Introduction
This is a dedicated instruction to carry out an Argus S-band HSC installation using a standard
cable and an additional S-band HSC SRT adapter box.
To obtain the S-band in HSC, install one module SRT adapter box, part number 000-13194-
001, unit type SRTAB-001. Inside there is a multi-voltage power supply with 1000 W 48 VDC.
Items covered by this guide
Part number
Description
Unit type
000-11250-001
12 ft antenna
ANT12LP/S-001
000-13193-001
S-band SRT 30 KW up-mast HSC
UPMAST/S-002
000-13194-001
S-band HSC SRT adapter box unit
SRTAB-001
Alternative standard installation cables:
Part number
Description
000-10332-001
15 m pre-wired SRT up-mast cable kit
000-10333-001
30 m pre-wired SRT up-mast cable kit
000-10334-001
60 m pre-wired SRT up-mast cable kit
SRT adapter box dimensions
WARNING
HIGH VOLTAGE IS PRESENT INSIDE
COVER MUST BE OPEN BY
SKILLED PERSONNEL ONLY
370
400
116
300
(min. distance to the floor)
28
360
320
Installation
The SRT module must be installed in between the Core unit and the S-band SRT 30 KW
up-mast HSC, part number 000-13193-001, unit type UPMAST/S-002.
It must be installed in a protected area close to the Core unit.
