manualshive.com logo in svg

Simrad NSS evo2, Operator'S Manual

Share
Download
Simrad NSS evo2 Operator'S Manual Download Page 53

North up

Rotates the radar image with the north direction upwards.

Course up

Rotates the radar image to display the current navigation course directly up.
This option works only when the NSS evo2 is navigating an active route. If you are not
navigating an active route the heading up orientation will be used until the navigation
function is started.

Positioning the radar center

You can move the radar PPI center to different positions within the radar panel, and select
how your vessel symbol moves on the radar image.
Radar motion is indicated on the upper left corner of the radar panel as either TM (True
motion) or RM (Relative motion).
The radar position can only be changed when the radar is transmitting.

Center

Look ahead

Custom offset

Center

Default setting. The radar PPI center is centered on the radar panel.

Look Ahead

Moves the radar PPI center to the bottom of the panel to give maximum view ahead.

Offset

Allows you to move the PPI center to any location on the radar panel.

1.

Select the offset option from the menu

2.

Tap the screen where you want to position the radar center

3.

Confirm the setting by pressing save offset option in the menu.

True motion

In True motion your vessel, and moving targets, move across the Radar screen as you travel.
All stationary objects remain in a fixed position. When the vessel’s symbol reaches the edge
of the screen, the radar image will be redrawn with the vessel symbol repositioned in center
of the screen.
When True motion is selected, the menu will expand to include a reset true motion option.
This allows for manually resetting the radar image and vessel symbol to screen center.

EBL/VRM markers

The electronic bearing line (EBL) and variable range marker (VRM) allows quick
measurements of range and bearing to vessels and landmasses within radar range. Two
different EBL/VRMs can be placed on the radar image.
The EBL/VRM is by default positioned from the center of the vessel. It is however possible to
offset the reference point to any selected position on the radar image.
When positioned, you can turn the EBL/VRM on/off by tapping the relevant markers on the
data bar or deselect the marker from the menu.

Radar

 | NSS evo2 Operator Manual

53

Summary of Contents for NSS evo2





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands