Simrad Maris ECDIS900 Installation Manual Download Page 29 | Manualshive

Page: 29 / 64

background image

Page 29

MARIS ECDIS900 Installation Manual

I

NSTALLING

MARIS

APPLICATIONS

The computers come with preinstalled software. Check the versions and update if needed. An
update can be done on top of the existing version and will not overwrite configurations or

user data. Sensor Monitor and Application Manager are installed as part of ECDIS900. Other

programs must be installed separately.

Tips

Create a folder “MARIS Apps” on the desktop. Share the folder.

Copy all installation files (ECDIS900, PC Radar, Navtex and Application Manager) to that folder.

This will enable the crew to reinstall failing programs if the need arises.

ECDIS900

Close all running programs and start the ECDIS900 installation program. Follow the

instructions on screen, accept default settings and pay attention to these steps:

TYPE OF MONITOR

Select the monitor installed. If you are in doubt, select Unknown Monitor.

The selection here loads the correct color table for the monitor in use or loads a standard
color table.

SCREEN DIMENSIONS

Grab a ruler and measure the dimensions. Enter the actual values. Incorrect settings will give

incorrect aspect ratio and circles on the chart will appear as ovals. This is important on wide-
screen monitors.

USER PASSWORD

Passwords are managed in the Application Manager. See below chapter Application Manager.

SELECT MONITORING OR PLANNING STATION

Double right-click the blue title bar and set the computer as either monitoring (master) or
planning (slave). Only one master is allowed, but several slaves can be configured.

S

ENSOR

M

ONITOR

This program is installed as part of the ECDIS900 package.

Sensor Monitor is the keystone in the MARIS system and takes care of the data flow on the

network between the sensors, computers and programs.

This chapter describes how to configure the most commonly used sensors, NMEA0183, AIS

Transponder and Display Controller. For other sensors, or for a more detailed
explanation, read the Sensor Monitor Chapter in ECDIS900 Technical Manual.

«
...
27
28
29
30
31
...
»

Summary of Contents for Maris ECDIS900

































































Reviews:

No comments

Related manuals for Maris ECDIS900

Brand: UnionSpecial Pages: 56

Brand: Rath Pages: 3

Brand: RASHA PROFESSIONAL Pages: 11

Brand: MADRIX Pages: 24

Brand: MADRIX Pages: 28

Brand: Tascam Pages: 128

Brand: ParaBody Pages: 6

Brand: Danelec Pages: 67

Brand: Panta Safe Light Pages: 2

Brand: Calrec Pages: 70

Brand: jablotron Pages: 2

Brand: jablotron Pages: 2

Brand: Jasco Pages: 2

Brand: Raytheon Pages: 68

Brand: KegLand Pages: 23

Brand: P.Lindberg Pages: 76

Brand: M-system Pages: 5

Brand: MA Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands