Simrad Maris ECDIS900, Installation Manual

Page: 2 / 64

MARIS ECDIS900 Installation Manual
Page 2
PREFACE
DISCLAIMER
As Navico is continuously improving this product, we retain the right to make changes to the
product at any time which may not be reflected in this version of the manual. Please contact
your nearest distributor if you require any further assistance.
It is the owner’s sole responsibility to install and use the equipment in a manner that will not
cause accidents, personal injury or property damage. The user of this product is solely
responsible for observing maritime safety practices.
NAVICO HOLDING AS AND ITS SUBSIDIARIES, BRANCHES AND AFFILIATES DISCLAIM ALL
LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE
OR THAT MAY VIOLATE THE LAW.
This manual represents the product as at the time of printing. Navico Holding AS and its
subsidiaries, branches and affiliates reserve the right to make changes to specifications
without notice.
GOVERNING LANGUAGE
This statement, any instruction manuals, user guides and other information relating to the
product (Documentation) may be translated to, or has been translated from, another language
(Translation). In the event of any conflict between any Translation of the Documentation, the
English language version of the Documentation will be the official version of the
Documentation.
COPYRIGHT
Copyright © 2021 Navico Holding AS.
WARRANTY
The warranty card is supplied as a separate document. In case of any queries, refer to the brand
website of your unit or system:
www.navico-commercial.com .
COMPLIANCE STATEMENT
Navico declare under our sole responsibility that the product conforms with the requirements
of:
•
European Council Directive 2014/90/EU on Marine Equipment modified by Commission
Implementing Regulation (EU) 2020/1170 (16 July 2020) – Wheelmark.
• The relevant declaration of conformity is available in the product's section at the
following website: www.navico-commercial.com .