Simrad ce32 mkii User Manual Download Page 73

Page: 73 / 130

3ELECT %CHOSOUNDER SETUP

Use the cursor to move
around in the display and
select new values by
means of the

[-/+]

keys.

Offset figures up to 99.9m
can be inserted to make up
transducer depth and keel
depth below surface.
The display can show:

DEPTH BELOW SURFACE,
DEPTH BELOW TRANS-
DUCER, DEPTH BELOW
KEEL.

Alarm for fish: Set strength to anywhere from 00dB
(weak echo) to 30dB (strong echo), and yout can set it

OFF.

Depth for fish can be set to min/max 0/9999 units.
Depth alarm can be set to min/max 0/9999 units.
Transmitter can be set

LOW,HIGH,AUTO,

and

OFF

to de-

termine noise.
Transmit pulse length can be set

SHORT, MEDIUM,

LONG

AUTO.

Max depth limit: AUTO, 50,75,100,150,200,250,300,
400,500,750,1000 m.

See Appendix A for more details on the functions in

the ’Echosounder setup’ display.

#ONFIRM ENTRY WITH

[ENT],

OR EXIT WITH

[MENU]

WITHOUT

MAKING ANY CHANGES

%CHOSOUNDER SETUP

KEYS TO PRESS

Echosounder setup:

Transducer depth below surface:

00.0 m

Keel depth below surface:

00.0 m

Display:

DEPTH BELOW TRANSDUCER

Alarm for fish:

Strength:

30dB OFF

Depth for fish: min: 0010 m max: 0100 m
Depth alarm maximum:

0100.0 m OFF

Depth alarm minimum:

0010.0 m OFF

Transmitter:

AUTO

Transmit pulse length:

AUTO

Max depth limit:

AUTO

Demo mode:

OFF

5,7

ENT

#% -+)) %CHOSOUNDER OPERATION

#HAPTER

Summary of Contents for ce32 mkii



































































































































Search results

Summary of Contents for ce32 mkii

Reviews:

Simrad ce32 mkii, User Manual, Page: 73 / 130

Search results

Summary of Contents for ce32 mkii

Reviews: