CA42/50/52 Miscellaneous menu
Chapter 9
130
Transmit WPs
1
Press
[1]
to start transmission of all waypoints stored in the
CA42/50/52 WP list to PC
When the transmission is completed you will receive a new info
window informing of how many waypoints were transferred.
MENU
Exit function and return to normal NMEA communication
Transmit routes
3
Press
[3]
to start transmission of all routes stored in the CA42/50/52
route list to PC
When the transmission is completed you will receive a new info
window informing of how many routes were transferred.
MENU
Exit function and return to normal NMEA communication
Receive WPs and routes
7
Press
[7]
to enable reception of waypoints and routes from the plan-
ning program
The transmission of waypoints and routes can now be activated from
the PC program.
The info window below will inform you of the progress of the recep-
tion of data by keeping an eye on the counter. When the counter stops,
means that all the data from the PC planner has been collected.
However, some PC programs may continue to transmit the same data
over and over again and will have to be stopped by pressing [ENT].
Receive WPs and routes
Reception in progress
37 WPs received
5 routes received
Stop and save
ENT
