Simrad CA34, Manual

Page: 118 / 212

Chapter 7-6 CA34/44/54 Miscellaneous menu
7.4 Loran C
MENU
Call up the menu bar, and...
5,4
load Loran C chain display
ADJ
Open for change
+/-
Leaf through the available chains - see listing below.
If required, go to the slaves, and...
+/-
Toggle between available slaves (not all chains have more than one
slave)
0-9
...and it is possible to alter the figures in the time delay
If required, go to Offset, and key in a positive or negative offset
0-9
Key in a positive or negative offset to the time delay (toggle positive/
negative with +/-)
ENT
Confirm entry
To change the position readouts to Loran C mode, see section 9.4
under Pilot/Position setup, where ‘Display position as’ can be tog-
gled to ‘Loran C’.
List of Loran C chains:
Central Pacific
Gulf of Alaska
Southeast U.S.
Great Lakes
Northeast U.S.
Canadian West Coast
Canadian East Coast
Labrador Sea
West Coast U.S.
North Pacific 4990
7960
7980
8970
9960
5990
5930
7930
9940
9990 Commando Lion
North West Pacific
Norwegian Sea
Mediterranean Sea
Icelandic
Saudi Arabia South
Saudi Arabia North
Eastern U.S.S.R.
Western U.S.S.R. 5970
9970
7970
7990
9980
7170
8990
7950
8000