Simrad AI50 Manual Download Page 29

Page: 29 / 74

Menu Mode

5 MENU MODE

5.1 General

The AI50 has many advanced features that are user configurable. These
options can be accessed by pressing

MENU during any display mode.

A window opens in the top left corner displaying the Main menu options
as shown in Fig. 5.1.

5.2 Display Mode settings

This section will change the way the display looks when in operation.

From the Main menu select “Display Mode”, and press

MENU or

►

. A

sub menu opens displaying the various options and their current status, as
shown in Fig. 5.2.

5.2.1 Coastline Detail

This option allows you to toggle the coastline detail on/off. The default
value is “on” and a tick is shown in the box. To toggle this option on/off,
highlight it and press

MENU or

►

WARNING

The coastline map is a visual aid to assist with orientation

and range. It is not a marine chart and must not be used as

a substitute for accurate charting

Fig. 5.1 – Menu Mode Display

Fig. 5.2 – Display Mode Options

Summary of Contents for AI50











































































Search results

Summary of Contents for AI50

Reviews:

Related manuals for AI50

Brands by name

Popular brands

Simrad AI50, Manual

Search results

Summary of Contents for AI50

Reviews:

Related manuals for AI50

Brands by name

Popular brands