© 2013 Simpson Strong-T
ie Company Inc.
© 2013 Simpson Strong-T
ie Company Inc.
-15-
-16-
DISMANTLING THE PT-22P
1. Remove stop pin cover.
2. Remove barrel stop pin and spring.
3. Remove barrel by sliding out of the
handle.
4. Unscrew the breech plug.
DISMANTLING THE PT-22P
5. Remove fastener guide.
6. Remove piston by sliding out of
back of barrel.
The front of the tool is now fully dismantled for cleaning, and inspection
for any damaged parts. Completely clean the tool, and replace any
damaged parts.
Reassemble the tool in reverse order of dismantling.
After reassembling the tool, with no powder load or fastener in the tool, reset
the piston by pulling the barrel assembly completely out, then push it back in.
Press the tool against a hard surface and pull the trigger. The iring pin
should make an audible “click” as an indication the tool was assembled
properly and parts have proper functioning. If an audible ‘click” is not heard,
reassemble the tool, and check for damaged parts and replace if necessary.