Simpson PT-22P Operator'S Manual Download Page 1

Simpson Strong-Tie

®

 Company Inc. (“Simpson”) provides this limited warranty to 

original purchaser. This product, if properly used and maintained in compliance with 
all instructions and warnings, will be free from substantial defects in material and 
manufacturing for 1 year from purchase date. Purchaser’s sole remedy is replacement 
upon return to Simpson within 1 year of purchase (shipping prepaid). 

 

WHERE LAWFUL, SIMPSON DISCLAIMS ALL OTHER 
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
A PARTICULAR PURPOSE BEYOND THIS WARRANTY 
PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS 
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE 
ABOVE LIMITATION MAY NOT APPLY TO YOU. WHERE 
LAWFUL, UNDER NO CIRCUMSTANCES SHALL SIMPSON 
BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL 

DAMAGES OR DIRECT OR INDIRECT LOSS OF ANY KIND, INCLUDING BUT NOT LIMITED 
TO BODILY INJURY, DEATH OR PROPERTY DAMAGE. SIMPSON’S ENTIRE LIABILITY IS 
LIMITED TO THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES DO NOT ALLOW THE 
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE 
LIMITATION OR EXCLUSION. MAY NOT APPLY TO YOU. SIMPSON IS IN NO WAY LIABLE FOR 
INCIDENTS RESULTING FROM USE WITHOUT PROPER CERTIFICATION OR DISREGARD OF 
INSTRUCTIONS AND WARNINGS. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Return Tools To:

Northwest U.S.A. 

Southwest U.S.A. 

Northeast U.S.A.

 

Simpson Strong-Tie Co. Inc. 

Simpson Strong-Tie Co. Inc. 

Simpson Strong-Tie Co. Inc.

 

5151 S. Airport Way 

12246 Holly Street 

2600 International Street

 

Stockton, CA 95206 

Riverside, CA 92509 

Columbus, OH 43228

 

(209) 234-7775 

(714) 871-8373 

(614) 876-8060

Southeast U.S.A. 

Eastern Canada 

Western Canada

 

Simpson Strong-Tie Co. Inc. 

Simpson Strong-Tie Co. Inc. 

Simpson Strong-Tie Co. Inc.

 

2221 Country Lane 

5 Kenview Boulevard 

11476 Kingston Street

 

McKinney, TX 75069 

Brampton, ON L6T 5G5 

Maple Ridge, BC V2X 0Y5

 

(972) 542-0326 

(905) 458-5538 

(604) 465-0296

T-A-PT22P13  2/13

LIMITED WARRANTY (ONE YEAR) 

ON SIMPSON STRONG-TIE

®

 BRAND TOOLS

The PT-22P tool complies with OSHA requirements and with 

ANSI A10.4 2007 speciications.

One Year

Limited

Warranty

WARNING

OPERATOR’S MANUAL

Read This Manual  

BEFORE Operating This Tool

For Single Shot Tool Model  

PT-22P

5956 W. Las Positas Blvd., Pleasanton, CA 94588  •  www.strongtie.com

(.22 caliber)

Summary of Contents for PT-22P











Reviews: