12
Figure 16
Figure 15
Cleanout Adapter on the exterior of wall, allows
brushing of the Horizontal Vent run through to
appliance (Figure 14).
D. Attach Wall Strap just above the tee. Wall
Straps must be placed every 8-feet along
an exterior vertical run (Figure 15). If your
exterior vertical run terminates horizontally
before penetrating the roofline, install at least
one Wall Strap on the Pipe Section before 90
Degree Elbow and Horizontal Cap (Figure 16).
Under no circumstances can a Vertical Cap be
installed adjacent to vertical wall. PelletVent
Pro offers fixed and Adjustable Wall Straps
to maintain a 1”-3” clearance, as desired. If
Assemble Pipe Sections in the same manner
described in Step 2 of the general instructions.
E. Seal the exterior section of the Wall
Thimble to the wall with non-hardening
waterproof sealant. As an option, you may
also seal the gap between the pipe and Wall
Thimble with sealant.
5.
If the flue exit is on back of the stove, and
a horizontal through-the-wall installation is
desired (Figure 13):
A. Place the appliance according to
manufacturer’s instructions.
B. Connect the Appliance Adapter and
sufficient Pipe Sections the seal and secure to
back of stove. Horizontal Pipe sections must
penetrate Wall Thimble and extend at least 6”
beyond the exterior wall after Horizontal Cap
is attached. If you are burning Corn you must
use a Round Horizontal Cap. Pipe Sections
exposed to exhaust gases between wall and
Cap must have a Stainless Steel outer liner.
The Round Horizontal Cap can be swiveled to
be directed away from nearby objects (fence,
plants, etc.), but must still be pointing in a
generally downward direction. Important:
Horizontal Caps must be pointed in a
NorthlineExpress.com
http://www.northlineexpress.com
Toll-Free 1-866-667-8454