10
Figure 10
Figure 11
3.
If the flue exits on back of stove and an
interior installation is desired (Figure 10):
A. Place the appliance according to the
manufacturer’s instructions.
B. Connect the Tee Adapter or combine Tee
with Cleanout and Pipe Adapter then seal and
secure the Pipe Adapter to the back of the
stove.
C. Continue to assemble Pipe Sections as
described in Step 2.
4.
If the flue exit is on the back of stove, and
an exterior vertical installation or partial vertical
installation is desired (Figure 11):
A. Place the appliance according to
manufacturer’s instructions.
B.
Cut and frame a square opening in the
wall as specified in
Table 1. PelletVent Pro
now offers the standard Wall Thimble or
Wall Thimble Air Intake Kit for through the
wall installations. The Air Intake Kit allows
combustion air to be drawn through the framed
Thimble opening, eliminating the need to
cut another opening in wall. The small flex
provided with this kit allows connection to
the Pellet Stove combustion air inlet. Loosely
assemble both halves of the Wall Thimble onto
Pipe Section. Connect the flexible hose with
clamp to the exterior half of the Wall Thimble.
Guide the flex through the opening in black
interior half of Wall Thimble, gently pull the
flex towards appliance
(Figure 12), and if
necessary trim excess flex to required length
with snips. Secure flex to combustion air inlet
PELLET VENT
PRO PIPE
NorthlineExpress.com
http://www.northlineexpress.com
Toll-Free 1-866-667-8454