13 - ENG
CHANGING NOZZLES ON SPRAY WAND (FIG. 6)
DANGER: Risk of fluid injection. Do not direct discharge stream toward
persons, unprotected skin, eyes or any pets or animals. Serious injury
will occur.
WARNING: Flying objects could cause risk of serious injury. Do not
attempt to change nozzles while pressure washer is running. Turn engine off
before changing nozzles.
1. Pull quick-connect coupler (E) back and insert nozzle (K).
6
K
E
2. Release quick-connect coupler and twist nozzle to make
sure it is secure in coupler.
WARNING: Flying object could cause risk of serious
injury. Ensure nozzle is completely inserted in quick-
connect socket and quick-connect collar is fully engaged
(forward) before squeezing gun trigger.
NOZZLE COLOR SPRAY PATTERN USES
SURFACES*
Red
0˚
powerful pinpoint
for spot cleaning
of hard, unpainted
surfaces or for
high reach areas
unpainted metal
or concrete;
DO NOT use on wood
Yellow
15˚
intense cleaning
of unpainted
hard surfaces
grills, driveways, concrete
or brick walkways,
unpainted brick or stucco
Green
25˚
intense cleaning of
larger areas
metal, concrete or wood
White
40˚
cleaning of
painted or delicate
surfaces
Auto/RV, marine, wood,
painted brick and stucco,
vinyl, painted siding
Black
low pressure
applies cleaning
solutions
Low pressure
spray is safe on all
surfaces. Always verify
compatibility of cleaning
solution prior to use.
*NOTICE:
The high pressure spray from your pressure washer is capable of
causing damage to surfaces such as wood, glass, automobile paint, auto striping
and trim, and delicate objects such as flowers and shrubs. Before spraying, check
the item to be cleaned to assure yourself that it is strong enough to resist damage
from the force of the spray.
HOW TO USE SPRAY WAND (IF EQUIPPED WITH 5N1 NOZZLE)
There are five spray pattern settings located on the 5n1 Multi-tip Nozzle. To select a
spray pattern, rotate the spray selector to the desired setting. Refer to the following
chart to choose the correct nozzle for the job to be performed.
Job Name: 33426 FNA SIMPSON 7110453 MANUAL
PDF Page: 7110453 MS Horizontal Series pw manual rev 0 12022017.p13.pdf
Process Plan: Tabloid Pdf Proof HI-RES - NO TRIM LINES
Date: 18-06-06
Time: 12:38:36
Operator: ____________________________
PageMark-BW-Comp
❏
OK to proceed
❏
Make corrections and proceed
❏
Make corrections and show another proof
Signed: ___________________ Date: ______
Job Name: 33426 FNA SIMPSON 7110453 MANUAL
PDF Page: 7110453 MS Horizontal Series_98%_DBL.p13.pdf
Process Plan: Tabloid Pdf Proof HI-RES With TRIM LINES
Date: 18-06-06
Time: 12:43:10
Operator: ____________________________
PageMark-BW-Comp
❏
OK to proceed
❏
Make corrections and proceed
❏
Make corrections and show another proof
Signed: ___________________ Date: ______