10- ENG
GET TO KNOW THE PRESSURE WASHER
NOTE: Photographs and line drawings used in this manual are for reference
only and do not represent a specific model.
Compare the illustrations with your unit to familiarize yourself with the location of
various controls and adjustments. Save this manual for future reference.
9
11
G
C
B
1
K
E
H
I
J
A
D
BASIC ELEMENTS OF A PRESSURE WASHER (FIG. 1)
A. High Pressure Pump
: Increases the pressure of the water supply.
B. Engine:
Drives the high pressure pump. Refer to the
Engine Owner's Manual
for location and operation of engine controls.
C. High Pressure Hose:
Carries the pressurized water from the pump to the gun
and spray wand.
D. Spray Gun:
Connects with spray wand to control water flow rate, direction
and pressure.
E. Spray Wand:
See
How To Use Spray Wand
instructions in
Operation
section.
F. Detergent Siphon Hose (not shown) (if equipped):
Feeds cleaning agents
into the pump to mix with the water. See
How To Apply Chemicals/Cleaning
Solvents
instructions in
Operation
section.
G. Handle
H. Frame
I. Pump Outlet
J. Pump Inlet
Job Name: 33426 FNA SIMPSON 7110453 MANUAL
PDF Page: 7110453 MS Horizontal Series pw manual rev 0 12022017.p10.pdf
Process Plan: Tabloid Pdf Proof HI-RES - NO TRIM LINES
Date: 18-06-06
Time: 12:38:36
Operator: ____________________________
PageMark-BW-Comp
❏
OK to proceed
❏
Make corrections and proceed
❏
Make corrections and show another proof
Signed: ___________________ Date: ______
Job Name: 33426 FNA SIMPSON 7110453 MANUAL
PDF Page: 7110453 MS Horizontal Series_98%_DBL.p10.pdf
Process Plan: Tabloid Pdf Proof HI-RES With TRIM LINES
Date: 18-06-06
Time: 12:43:10
Operator: ____________________________
PageMark-BW-Comp
❏
OK to proceed
❏
Make corrections and proceed
❏
Make corrections and show another proof
Signed: ___________________ Date: ______