background image

18- ENG 

These warranties pass through to the end user and are non-transferable. As a 

factory authorized and trained Warranty Service Center, the factory will honor the 

terms of all component warranties and satisfy claims of the appropriate warranty 

provisions.
Normal wear items include, but are not limited to, valves and seals, which are not 

covered by this warranty.
This warranty replaces all other warranties, express or implied, including without 

limitation any warranties of merchantability or fitness for a particular purpose and 

all such warranties are hereby disclaimed and excluded by the manufacturer. The 

manufacturer’s warranty obligation is limited to repair and replacement of defec-

tive products as provided herein and the manufacturer shall not be liable for any 

further loss, damages, or expenses – including damages from shipping, accident, 

abuse, acts of God, misuse, or neglect. Neither is damage from repairs using parts 

not purchased from the manufacturer or alterations performed by non-factory 

authorized personnel. Failure to install and operate equipment according to the 

guidelines put forth in the instruction manual shall void warranty. 

This warranty does not cover the following: 

machines used for rental purposes, 

damage resulting from shipping (claims must be filed with freighter), accident, 

abuse, act of God, misuse, or neglect. Neither is damage from repairs or altera-

tions performed by non-factory authorized personnel or failure to install and oper-

ate equipment according to the guidelines put forth in the instruction manual.
The manufacturer will not be liable to any persons for consequential damage, for 

personal injury, or for commercial loss.

WARRANTY DOES NOT APPLY TO FAILURES DUE TO:

Freight damage

Damage due to chemical deterioration, scale build up, rust, corrosion or

thermal expansion

Freeze damage

Damage caused by parts or accessories not obtained from an authorized

dealer or not approved by the manufacturer.

Normal wear of moving parts or components affected by moving parts.

ENGINE

Covered by engine manufacturer warranty. See 

engine manual.

HIGH PRESSURE PUMP (DEFECTS IN MATERIAL AND WORKMANSHIP)

 

Covered by pump manufacturer warranty

FRAME (DEFECTS IN MATERIAL AND WORKMANSHIP)

 

Ten

 (1

0

) year

s

 from date of purchase.

ACCESSORIES (DEFECTS IN MATERIAL AND WORKMANSHIP)

Includes nozzles, hoses, spray guns, wands, tires, feet
Ninety (90) days from date of purchase.

Summary of Contents for 60242

























Reviews: