Simpson Strong-Tie Quik Stik Operator'S Manual Download Page 7

© 2018 Simpson Str

ong-T

ie Company Inc.

-7-

LIMITED WARRANTY (CONT.)

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION 
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM 
STATE TO STATE.

To obtain warranty service, you must contact Simpson Strong-Tie promptly at 

(800) 999-5099

 or at Simpson Strong-Tie Company Inc., 5956 West Las Positas 

Boulevard, Pleasanton, CA 94588, regarding any potential claim, no later than sixty 
(60) days after you discover the potential claim. Upon request by Simpson Strong-Tie, 
you must provide Simpson Strong-Tie with proof of purchase and written records 
evidencing, in reasonable detail, the date and manner of any service or maintenance 
of the Quik Stik Products, as applicable. Simpson Strong-Tie may, in its absolute 
discretion, request that you return the allegedly defective Quik Stik Products to 
Simpson Strong-Tie, in which case Simpson Strong-Tie will issue a Return Materials 
Authorization (RMA), which must be completed and returned to Simpson Strong-Tie 
with the Quik Stik Product. Simpson Strong-Tie is not responsible for any costs or 
expenses incurred in connection with the return of Quik Stik Products to Simpson 
Strong-Tie, but Simpson Strong-Tie shall bear all costs and expenses incurred in 
connection with the shipment of replacement Quik Stik Products in the event that 
Simpson Strong-Tie determines that the Quik Stik Product should be replaced in 
accordance with this Limited Warranty. If Simpson Strong-Tie elects to repair or 
replace the Quik Stik Product, Simpson Strong-Tie shall have a reasonable time to  
do so.

No one is authorized to change or add to this Limited Warranty. If at any time 
Simpson Strong-Tie does not enforce any of the terms, conditions or limitations 
stated in this Limited Warranty, Simpson Strong-Tie shall not have waived the benefit 
of said term, condition or limitation and can enforce it at any time. This Limited 
Warranty is extended only to the original purchaser and is not transferrable. It is not 
intended nor shall it be construed to create rights in any third party.

Summary of Contents for Quik Stik





















Reviews: