Simpson Strong-Tie Quik Stik Operator'S Manual Download Page 6

© 2018 Simpson Str

ong-T

ie Company Inc.

-6-

LIMITED WARRANTY (CONT.)

intended use, and each intended use of a Quik Stik Product must be reviewed and 
approved by qualified professionals. Each Quik Stik Product is designed for the load 
capacities and uses listed in the Simpson Strong-Tie Documentation, subject to the 
limitations and other information set forth in the Simpson Strong-Tie Documentation.

Quik Stik Product demonstrations, training, operator examinations, technical and 
customer support and other services provided by Simpson Strong-Tie are based 
on Simpson Strong-Tie’s present knowledge and experience, are conducted for 
illustrative or instructive purposes only, do not constitute a warranty of Quik Stik 
Product capabilities, specifications or installation and do not modify the applicable 
Limited Warranty for Quik Stik Products set forth herein. Any services provided by 
Simpson Strong-Tie are provided without any representation or warranty of any kind, 
and Simpson Strong-Tie assumes no liability for any representations or statements 
made as part of such Quik Stik Product demonstrations, training, operator 
examinations or other services. In the event of any inconsistency between any 
information provided during any such demonstration or service, and the information 
in any applicable Simpson Strong-Tie Documentation, the information in the Simpson 
Strong-Tie Documentation shall govern. In the event of any inconsistency between 
any information provided on the Website, and the information in any other Simpson 
Strong-Tie Documentation, the information on the Website shall govern.

ALL WARRANTY OBLIGATIONS OF SIMPSON STRONG-TIE SHALL BE 
LIMITED, AT SIMPSON STRONG-TIE’S ABSOLUTE DISCRETION, TO EITHER 
REPAIRING THE DEFECTIVE QUIK STIK PRODUCT OR PROVIDING A 
REPLACEMENT FOR THE DEFECTIVE QUIK STIK PRODUCT. THIS REMEDY 
CONSTITUTES SIMPSON STRONG-TIE’S SOLE OBLIGATION AND LIABILITY 
AND THE SOLE AND EXCLUSIVE REMEDY OF PURCHASER AND, WITHOUT 
LIMITING THE GENERALITY OF THE FOREGOING, EXCLUDES ANY LABOR 
OR OTHER COSTS INCURRED IN CONNECTION WITH A WARRANTY CLAIM. 
PURCHASER ASSUMES ALL RISK AND LIABILITY ASSOCIATED WITH ANY 
USE OF THE QUIK STIK PRODUCT, INCLUDING BUT NOT LIMITED TO 
SUITABILITY FOR ITS INTENDED USE.

THE LIMITED WARRANTY HEREIN IS EXPRESSLY IN LIEU OF ALL OTHER 
WARRANTIES, AND, WHERE LAWFUL, SIMPSON STRONG-TIE DISCLAIMS 
ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE AND WARRANTIES ARISING FROM COURSE OF PERFORMANCE, 
COURSE OF DEALING OR TRADE USAGE. IN NO EVENT WILL SIMPSON 
STRONG-TIE BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE 
OR SPECIAL DAMAGES OR DIRECT OR INDIRECT LOSS OF ANY KIND, 
INCLUDING BUT NOT LIMITED TO PROPERTY DAMAGE, DEATH AND 
PERSONAL INJURY. SIMPSON STRONG-TIE’S ENTIRE LIABILITY IS LIMITED 
TO THE PURCHASE PRICE OF THE DEFECTIVE QUIK STIK PRODUCT. 
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED 
WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 

Summary of Contents for Quik Stik





















Reviews: