Copyright © Simpro Handling Equipment Ltd
Page 9
Problem
Possible
Causes
Remedy
Cradle will
not go up
Flat Battery
Recharge the battery
Faulty switch
or wiring
Check and rectify
Faulty motor
relay
The motor relay should click
when
the ‘Up’ and Safety
buttons are pressed.
If not, check and repair/replace.
Clicking sound
when Raise
button pressed
Battery almost
flat
Recharge the battery
Machine will
not lift heavy
bins, although
the motor runs
Bin too heavy
Reduce the bin weight
Pressure-
relief valve
set too low
Consult manufacturer or agent
Cradle will not
come down
from the
inverted
position
Mast slider frame
sticking
in masts
Spray lubricant inside the mast.
Lift ram jamming
Consult manufacturer or agent.
Faulty switch,
wiring, or
lowering valve
The lowering valve should click
when the ‘Down’ and Safety
buttons are pressed. If not, check
the switch, wiring and solenoid
Cradle jams
part-way down
Mast bent or
damaged
Check and repair
Tip guide flap
sticking or
damaged
Check and repair
A more detailed Service Manual giving specific testing and repair
instructions is available on request from the manufacturer.
