2
S T E P 1
Charging the Battery Pack
a. Grab firmly and pull the battery pack from the Serenata to remove (Fig. 1).
b. Attach the charger to the battery pack and plug into any 110V power source.
The battery is fully charged when the indicator light changes to green (Fig. 2).
Note:
Charge battery for 8 hours before first use.
(Fig. 1)
S T E P 2
Attaching the Serenata to Umbrella
a. Grab firmly and pull the battery pack from the Serenata to remove (Fig. 3).
b.
For centerpost market umbrellas
, slide the Serenata onto the center post.
Note:
It may be necessary to squeeze the 2 lock and release tabs on the
Serenata to fit onto post. (See page 7)
For SimplyShade sidepost cantilever style umbrellas
, attach Serenata onto
adapter on lower hub.
For all other sidepost cantilever styles,
attached supplied Adapter Sleeve (G)
and Universal Hub Adapter (H) to the lower hub and tighten with supplied
screws. Swap out cushions grips on Serenata with smallest cushion grip size.
(See page 8)
c. Attach Serenata onto adapter.
(Fig. 3)
9
(Fig. 2)
Hold Serenata firmly and pull the battery pack from umbrella light (Fig. 32). Slide
the Serenata onto Universal Hub Adapter or center post (Fig. 33). If using Universal
Hub Adapter, swap out cushion grips with smallest cushion grip size. For all other hubs
or center post, change cushion grip size if necessary. It may be necessary to squeeze
the 2 lock and release tabs on the Serenata to fit onto post.
(Fig. 33)
(Fig. 32)
Secure Serenata to Universal Adapter Hub by sliding small screws on Hub into holes
located on top of Serenata. Once Serenata is securely on light adapter or center post,
slide battery pack back onto Serenata (Fig. 35). Your Serenata is now ready for use
(Fig. 36 ).
(Fig. 34)
(Fig. 35)
(Fig. 36)
