EN
INTRODUCTION
Thank you for choosing to purchase the Mobile Commode/Footrests from
SimplyMed. Our Mobile Commode and Footrests are manufactured using only the
finest materials available. If used in accordance with the user instructions, they
should give you many years of continuous service.
BEFORE USE
•
Carefully remove all packaging. Avoid using any knives or other sharp
instruments as this may damage the surface of the product.
•
Check the product for any visible damage If you see any damage or
suspect a fault, do not use your product as it may compromise the safety
of the user, but contact your supplier for support.
ASSEMBLY
The package contains the following components:
•
The main frame with four brake castors attached
•
White commode plastic aperture seat (attached to the main frame)
•
Grey commode seat cover
•
A pair of detachable arms
•
Detachable back
•
One pair of Footrests (only)
Please read the following installation instructions
carefully:
1.
Remove all contents from the box
2.
Place the assembled base on a level floor
3.
At the rear of the commode you will see two black threaded wheel nuts;
undo the wheel nuts so that the locking holes are clear
4.
Place the two back legs into the locating holes on the back edge of the
commode frame
5.
Secure the back by turning the black lock nuts until you feel the nut
biting against the back leg
6.
Do not over tighten
7
. Do not use tools as it is only necessary to have the back secured finger tight
8. Place the two detachable arms into the four locating holes featured two
each side of the commode
NB. This equipment must be installed by a competent person and a risk
assessment may be needed as to the suitability of the chair for the particular
user.
SMT006 Mobile Commode
Weight Limit: 190 kg (30 stone)
Do not exceed the weight limit stated
– doing so could put the user at
risk.
