2
Event Mode
‘r’ = event disabled
‘R’ = enabled in [RUN] and [VAC]
‘V’ = enabled in [VAC] and [ALT] with
randomness
Day of the Week
[RUN]
03:50PM
05/09/06 Tue
Schedule Mode (change via 'Set Time')
[OFF] = No Events Operate
[RUN] = Run 'R' Events Operate
[VAC] = Vacation 'V' and Run 'R' Events Operate
[ALT] = Vacation ‘V’ Events Operate
Event Type
LA = Link Activator/Deactivator (lighting scene)
D# = Device Dim Level (D0 =100%, D9 =90%, D8=80%... D1=10%)
Event #
01 to 99
events
Scene-Link # or Device #
defined by Event Type (LA or D
#)
01)023 SMTWTFS V
Dusk+15 11:00P LA
On Time
Off Time
MAIN MENU
1) Set Event
6) Set Randomness
2) Set Time
7) Link Mode
3) Set Location
8) Tools
4) Set Network
5) Delete Events
QUICK START
Step 1)
Plug Scheduler in to power (fully charged in 24 hours).
Step 2)
Press Menu button, select 'Set Time' and press enter; set time and mode data, then press
enter to save and exit.
Step 3)
Select 'Set Location' and press enter; input zip code and press enter (3 times as prompted)
to save and return to main menu.
Step 4)
Select 'Set Network' and press enter; input your network ID* and press enter to save.
Step 5)
Select 'Set Events' to begin editing schedule.
* Note: for Pre-Configured Kits (e.g. DKIT-0x) and their Accessories, the network ID is 250 and
each device is labeled with its ID number.
Hint:
ENTER
button selects a menu item, saves settings, advances to the next editable field,
and executes commands. The
MENU
button accesses the main menu and exits a screen
without saving changed settings.
Date
Time
EVENT SCREEN
Days of the Week
lower case = off
capital = on
IDLE SCREEN
QUICK REFERENCE GUIDE
Controller, Scheduler-Timer
Model UCS-01
TOOLS SUB-MENU
A) CIM Mode
F) Noise View
B) Add Device
G) Noise Log
C) Add Link
H) Clock Source
D) Delete Link
I) Set Contrast
E) Read Link
J) Use Repeater