Step 1
1. Align two pre-drilled holes on each Leg B & Leg C with two Dowels on each side
of Leg Lower Connector D .
2. Insert Cross Nuts 4 into pre-drilled holes in Leg Lower Connector D
with the slot facing out. Use a flathead Screwdriver to turn it to align with
the Bolts 4 . Repeat on the opposite side.
3. Use Allen Key 5 to tighten Bolts.
Repeat Step 1-3 for second set of legs.
B
C
D
4
4
5
Model # 3AXCSAW-09
Assembly
10
