4
/ 9
5.
Operation Controls and Functions
5.1
Transmitter Panel
No.
Name
Function Description
1 Power LED
Red LED will be illuminated when the transmitter has power.
2 SERVICE port Firmware update port.
3 DC 24V
DC 24V/1A power supply input port.
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered on by 24V/1A power supply, the
other one doesn’t need power supply.
4 HDBT OUT
RJ45 connector for connecting the HDBT In port of receiver
with a CAT6/6a cable.
5
Connection
Signal Indicator
LED (Green)
▪ Illuminated: Transmitter and Receiver have a
good connection status.
▪ Flashing: Transmitter and Receiver are in poorconnection
status.
▪ Dark: Transmitter and Receiver are not connected.
6
Data Signal
Indicator LED
(Orange)
▪ Illuminated: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7 AUDIO OUT
3.5mm stereo connector for analog audio output.
8 HDMI OUT
HDMI loop output for display.
9 HDMI IN
HDMI source input port.
10 IR IN
IR input port for receiving IR from IR-RX or Control system
11 IR OUT
IR output port for control of source device(s). Thi IR output
signal is from the IR IN port of receiver.
1
2
3
7
8
9
10
12
5 4 6
SERVICE
AUDIO OUT
HDMI IN
IR IN
HDMI OUT
IR OUT
HDBT OUT
RS-232
TX
RX
DC 24V
11
