Simplicity Legacy XL 2000 Series Operator'S Manual Download

Page: 11 / 52

CE Safety Icons / Safety Interlock Test

Warning: Read Operator’s
Manual.

Read and understand the

Operator’s Manual before using

this machine.

Danger: Thrown Objects.

This machine is capable of throwing

objects and debris. Keep

bystanders away.

Warning: Remove Key Before
Servicing.

Remove the key and consult techni-

cal literature before performing

repairs or maintenance.

1725618

Warning: Rotating Shaft Can
Cause Injury or Death.

Keep hands and feet clear.

Danger: Machine Rollover.

Do not use this machine on slopes

greater than 10°.

Danger: Dismemberment.

This machine can amputate limbs.

Keep bystanders and children away

when engine is running.

Danger: Dismemberment.

This mower deck can amputate

limbs. Keep hands and feet away

from blades.

SAFETY ICONS

SAFETY INTERLOCK
SYSTEM TESTS

This unit is equipped with safety interlock switches and

other safety devices. These safety systems are pre-

sent for your safety: do not attempt to bypass safety

switches, and never tamper with safety devices. Check

their operation regularly.

Operational SAFETY Checks

Your unit is equipped with a seat switch safety system.

Check the seat switch operation every fall and spring

with the following tests.

Test 1 — Engine should NOT crank if:

• PTO switch is ON, OR
• Brake pedal is NOT fully depressed (parking brake

OFF), OR

• The cruise control lever is NOT in NEUTRAL.

Test 2 — Engine SHOULD crank if:

• PTO switch is OFF, AND
• Brake pedal is fully depressed (parking brake ON),

AND

• The cruise control lever is in NEUTRAL.

Test 3 — Engine should SHUT OFF if:

• Operator rises off seat with PTO engaged, OR
• Operator rises off seat with brake pedal NOT fully

depressed (parking brake OFF).

Test 4 — Blade Brake Check

Mower blades and mower drive belt should come to a

complete stop within five seconds after PTO switch is

turned OFF. If mower drive belt does not stop within

five seconds, see your dealer.

Test 5 — Reverse Mow Option (RMO) Check

• Engine should shut off if reverse travel is attempted

if the PTO has been switched on and RMO has not

been activated.

• RMO light should illuminate when RMO has been

activated.

NOTE: Once the engine has stopped, the PTO switch

must be turned off after the operator returns to the seat

in order to start the engine.

WARNING

If the unit does not pass a safety test, do not
operate it. See your authorized dealer. Under no
circumstance should you attempt to defeat the
purpose of the safety interlock system.

Not

for

Reproduction

Summary of Contents for Legacy XL 2000 Series





















































Search results

Summary of Contents for Legacy XL 2000 Series

Reviews:

Related manuals for Legacy XL 2000 Series

Brands by name

Popular brands

Simplicity Legacy XL 2000 Series, Operator'S Manual

Search results

Summary of Contents for Legacy XL 2000 Series

Reviews:

Related manuals for Legacy XL 2000 Series

Brands by name

Popular brands