6
AsseMbLIng tHe VACUUM
Positioning the Power Cord:
• Loosen, but do not remove, the screw holding the
upper cord hook (Fig. 1).
• Position the cord between the cord hook and the
vacuum tube (Fig. 2). Re-tighten the screw.
• Once the cord is secured by the cord hook,
proceed with wrapping the cord.
• Wrap the cord clockwise around the top and
bottom cord hooks. Fasten the plug to the
wrapped cord using the channel on the plug.
When not in use, store the vacuum indoors in
a clean, dry area where it cannot be damaged
or cause injury.
Fig. 1
Fig. 2
