12
PRobLeM soLVIng gUIDe
PROBLEM
Vacuum won’t turn on
Vacuum won’t pick up or
low suction
Dust escaping from
vacuum
POSSIBLE REASON
• Power cord not firmly
plugged in
• Blown fuse or tripped
breaker
• Needs service
• Vacuum bag full
• Broken belt
• Worn brushroll
• Vacuum bag not installed
properly
POSSIBLE SOLUTION
• Plug unit in firmly
• Check house fuse or
breaker. Replace fuse /
reset breaker.
• Take to Authorized
Simplicity Retailer
• Install new bag
• Replace belt
• Replace brushroll
• Install bag properly.
Review bag installation
(page 8)
Troubleshooting
• Keep your vacuum clean and in good operating condition.
• Change vacuum bags once a month or when the bags are 2/3 full to maximize cleaning performance.
• Always use genuine Simplicity vacuum bags and replacement parts. Use of other products may result
in poor cleaning performance, potential vacuum cleaner damage and may void vacuum warranty.
Genuine products are designed for maximum cleaning performance.
• Have your vacuum checked annually by your Authorized Simplicity Retailer.
• Store your vacuum carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner’s manual instructions.
Key Replacement Parts
• Genuine Paper Vacuum Bags:
SF-6
• Genuine HEPA Media Vacuum Bags:
SFH-6
• Genuine Vacuum Belts:
SBS-2
For Best Performance
CAUTION
: To reduce the risk of injury from moving parts, unplug the vacuum before servicing.
CAUTION
: To reduce the risk of electric shock, do not handle plug or appliance with wet hands.
Any other service should be performed by an Authorized Simplicity Retailer.
To locate your nearest Authorized Simplicity Retailer visit our website
at www.SimplicityVac.com or call 888.9.SIMPLY.
