Simplicity DTA6SY2B, Instructions For Use Manual

Page: 8 / 11

EN 3
decreased. So the cooker hood in automatic regime
and in extreme cases can constantly measure a
higher level of air pollution and the hood will be not
switched off. The best use of this function can be
achieved with selecting the automatic regime at the
beginning of cooking and with it switching off after
finishing of cooking.
MAINTENANCE AND CLEANING

At cleaning or maintenance switch the appliance
off from the power and this with disconnecting
from the socket or with switching off of
corresponding circuit breaker.

The regular maintenance and cleaning ensure the
efficiency, reliability and longer lifetime of cooker
hood.

Pay special attention to grease filter and to
carbon filter.

For cleaning of cooker hood do not use cleaning
articles containing aggressive substances mainly
chlorine and dissolvents.
GREASE METAL FILTER

The grease metal filter (F) catches the fat
particles.

The metal filter should be cleaned manually or in
dishwasher (at 65

C) with use of appropriate
detergents.

The filter can slightly change its color when
washed in dishwasher; nevertheless this fact has
no influence to its functionality.

Let the filter thoroughly dry after washing and
return it to cooker hood in dry state only.
CASSETTE CARBON FILTER

The carbon filter (E) absorbs the kitchen smell.

The carbon filter should be never washed!
INSTALLATION OF CASSETTE CARBON
FILTER

Disconnect the appliance from the power net.

Take out the grease filter (F) and fasten the
cassette carbon filter (E) to its internal side
– see
the picture.
NOTICE!
The caught fat in the filter has influence not only to
the effectiveness of cooker hood but at neglected
maintenance could cause also a fire! Therefore we
recommend the observation of instructions for
cleaning and changing of filters.
LIQUIDATION OF CARBON FILTERS
AFTER FINISHED LIFETIME

The used filters can be put to normal household
waste.

The liquidation should be provided in
concordance with the corresponding national
standards and regulations.
LIGHTING
The cooker hood has halogen bulbs 2 x 20 W
(type 12V/20W - G4).
REPLACING OF HALOGEN BULB (FIG. 7)

Disconnect the cooker hood from the power net.

Shift a flat piece (a small screwdriver or flat knife)
carefully between the rings of halogen lighting.
With slight lever action make free the internal ring
with the glass cover of lighting.

Provide the replacement of halogen bulb.

Return back the ring with the glass cover of
lighting to original location.
CAUTION!
Do not touch the halogen bulbs with your naked
fingers
CLEANING

Clean regularly the internal and external parts of
cooker hood with soft cleaning agents.

Never use abrasive cleaning means.

Clean the glass surfaces with special means for
glass, mirrors and windows.
METHOD OF USE AND LIQUIDATION OF
PACKAGING
Grooved cardboard, packaging paper
- sale to waste collecting company
- to collecting vessels for used paper
- other reuse
Polystyrene
- to corresponding collecting vessels
Packaging foil and PE backs
- to collecting vessels for plastic
LIQUIDATION OF APPLIANCE AFTER
FINISHING OF USE
This appliance is marked in accordance with
Directive 2012/19/EU on manipulation with waste
from electric and electronic equipment
– WEEE.
This directive determines the unified European (EU)
frame for collection and recycling of used
equipment.
The appliance contains valuable materials which
should be reused after finishing of their use. Please
give your used appliance to waste processing
company.
CLAIMS
If there is any defect on the appliance within the
guarantee period, do not repair itself. Apply a claim
in the shop in which you bought the appliance or at
service representatives, mentioned in the Guarantee
conditions.