38
INTERRUPTING AND CHANGING
THE PROGRAM
432615
INTERRUPTIONS
Interrupting the program process
Press the START/PAUSE key to pause/
resume and the program.
Open door
If the dryer door is opened during the
drying process, the drying cycle will be
interrupted.
When the door is closed and the START/
PAUSE key is pressed, the drying will
resume from the point at which it was
interrupted.
Full condensate tank
When the condensate tank is full, the drying
program will be interrupted (signal light 2b
will flash).
Empty the condensate tank (see section
Cleaning and Maintenance).
Press the START/PAUSE key to resume the
drying cycle from the point at which it was
interrupted.
Power supply failure
When power supply is resumed, the signal
light on the START/PAUSE key will flash.
To resume the drying process, press the
START/PAUSE key.
CHANGING THE PROGRAM
Press the START/PAUSE key and rotate
the program selector dial to the "OFF" (0)
position.
Select another program and press the
START/PAUSE key again.
CHANGING A FUNCTION
Extra functions can be selected for each
program (see Program table).
The most recently selected combination
of extra functions for a particular program
(except for delayed start) will remain stored
until it is changed again.
Summary of Contents for D74SY2B
Page 1: ...Instructions for Use EN...
