Not for
Reproduction
22
Specifications Chart (Prestige™ Models)
Item
MODELS
2691468
2691418
2691480
ENGINE
Commercial Series by Briggs &
Stratton
®
with EFI
Commercial Series by Briggs &
Stratton
®
with EFI
Commercial Series by Briggs &
Stratton
®
with EFI
Displacement
810 cc
810 cc
810 cc
Electrical System
16-Amp
16-Amp
16-Amp
Battery
350 CCA
350 CCA
350 CCA
Oil Capacity
67 oz
67 oz
67 oz
Spark Plug Gap
.030 in (.76 mm)
.030 in (.76 mm)
.030 in (.76 mm)
Spark Plug Torque
180 lb-in (20 Nm)
180 lb-in (20 Nm)
180 lb-in (20 Nm)
Fuel Capacity
3.6 Gal
3.6 Gal
3.6 Gal
TRANSMISSION
Make and Type
Tuff Torq
®
K72
Tuff Torq
®
K72
Tuff Torq
®
K664
MOWER DECKS
Width of cut
50 in (127 cm)
52 in (132 cm)
50 in (127 cm)
Number of Blades
3 standard lift
3 standard lift
3 standard lift
Cutting Height
1.5-4.0 in (3.8 - 10.2 cm)
1.5-4.0 in (3.8 - 10.2 cm)
1.5-4.0 in (3.8 - 10.2 cm)
CHASSIS
Front Wheels Tire Size
15 x 6-6
15 x 6-6
15 x 6-6
Tire Inflation Pressure, Front
12-14 psi (0.82 - 0.92 Bar)
12-14 psi (0.82 - 0.92 Bar)
12-14 psi (0.82 - 0.92 Bar)
Rear Wheels Tire Size
23 x 10.5-12
23 x 10.5-12
23 x 10.5-12
Tire Inflation Pressure, Rear
10 psi (0.68 Bar)
10 psi (0.68 Bar)
10 psi (0.68 Bar)
Power Ratings
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995. Torque
values are derived at 2600 RPM for those engines with “rpm” called out on the label and 3060 RPM for all others; horsepower
values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power
values are taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments.
Actual gross engine power will be higher than net engine power and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gasoline engine
may not develop the rated gross power when used in a given piece of power equipment. This difference is due to a variety
of factors including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor,
fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for
this engine.
Parts and Accessories
Contact an authorized dealer.
