FRONT-TO-BACK LEVELING
6. Arrange the blades so they face front-to-back.
7. Measure the distance from the ground to the front tip
of the center blade, and from the ground to rear tips
of left-hand and right-hand blades.
Front tip of the center blade should be 1/4" (6mm)
higher than rear tips of left-hand and right-hand
blades. If not, proceed with Steps 8 - 9.
8.
44” Mowers
- To raise front of mower deck, loosen
front nut (
A
, Figure 32) and turn rear nut (
B
) against
bracket. To lower front of mower deck, loosen rear
nut (A) and the bracket will move backwards to
lengthen rod.
46” and 52” Mowers
- Loosen the outside nut (
A
,
Figure 33). Turn the eccentric nut (
B
) to raise or
lower the front of the mower. When the mower is
level, hold the eccentric nut while tightening the
outside nut.
9. Re-check the blade measurement then tighten the
front nut against the bracket to secure.
Figure 33. Front to Back Leveling (46” & 52” Mowers)
A
B
MAINTENANCE
30
Figure 32. Front to Back Leveling (44” Mowers)
B
A
Not
for
Reproduction
