7
This vacuum is intended for household use only.
OPERATION
Charging the Vacuum
Install the battery into the vacuum. (Installing
the Battery pg. 5 ) Plug the battery charger
dock into an electrical outlet. Mount the
vacuum into the charger until it clicks
into place (Fig. 1). The power button will
illuminate red while the battery is charging
(Fig. 2). When the power button illuminates
green the battery is fully charged. Remove
the vacuum from the charger dock and
begin vacuuming.
When the battery power runs low, the
vacuum will automatically shut off to protect
the battery. Place the vacuum on the battery
charger dock to recharge the battery.
NOTE: The vacuum is equipped with a
safeguard to recognize when it’s charging so
it cannot be turned on during charging time.
On/Off Button
Push the power button (Fig. 3) to turn the
vacuum on. The light will turn green and the
vacuum defaults to low speed. Press the
power button again to turn the vacuum off.
High Speed Button
Press the high speed switch button (Fig. 4)
for maximum power. Use the maximum power
setting for low pile carpet or throw rugs. Use
the default low speed setting for bare floors.
Reclining the Vacuum
Place your foot on the top of the floor nozzle
and pull the handle toward you.
Fig. 1
Fig. 2
Fig. 3
Fig. 4