background image

     4

OWNER’S RESPONSIBILITY

Accurate assembly and safe and effective use of the rototiller is the 
owner’s responsibility.

s

  Read and follow all safety instructions.

s

  Carefully follow all assembly instructions.

s

  Maintain the tiller according to directions and schedule included 

in this Earthquake operator’s manual.

s

  Ensure that anyone who uses the tiller is familiar with all 

controls and safety precautions.

SPECIAL MESSAGES

Your manual contains special messages to bring attention to potential 
safety concerns, machine damage as well as helpful operating and 
servicing information. Please read all the information carefully to avoid 
injury and machine damage.

NOTE: General information is given throughout the manual 
that may help the operator in the operation or service of the 
machine. 

IMPORTANT SAFETY PRECAUTIONS

Please read this section carefully.

 Operate the tiller according to the 

safety instructions and recommendations outlined here and inserted 
throughout the text. Anyone who uses this tiller must read the instruc-
tions and be familiar with the controls. Your tiller is equipped with a 
safety device that enables you to stop the wheels and tines quickly 
in an emergency. Learn how the drive safety control lever operates 
and how to control the tiller at all times.

This symbol points out important safety instructions 
which if not followed could endanger your personal 
safety. Read and follow all instructions in this manual 
before attempting to operate this equipment.

s

  Do not allow children to operate this rototiller. Keep small children away 

from the area being tilled. Do not allow adults to operate the tiller without 
proper instruction.

PREPARATION

s

  Dress appropriately when operating the tiller. Always wear sturdy 

footwear. Never wear sandals, sneakers, or open shoes, and never 
operate the tiller with bare feet. Do not wear loose clothing that 
might get caught in moving parts.

s

  Carefully inspect the area to be tilled and remove all foreign objects. 

Do not till above underground water lines, gas lines, electric cables, 
or pipes. Do not operate the tiller in soil with large rocks and foreign 
objects which can damage the equipment.

s

  Disengage all clutches and leave all control levers in the neutral 

position before starting the engine.

s

  Handle fuel with care; it is highly fl ammable.

 

a.  Use an approved fuel container.

 

b.  Never add fuel to a running engine or hot engine.

CAUTION

!

CAUTION INDICATES YOU CAN OR YOUR EQUIP-
MENT CAN BE HURT IF THE SAFETY INSTRUC-
TIONS THAT FOLLOW THIS SIGNAL WORD ARE 
NOT OBEYED.

WARNING

!

YOU MUST READ, UNDERSTAND AND COMPLY WITH 
ALL SAFETY AND OPERATING INSTRUCTIONS IN 
THIS MANUAL BEFORE ATTEMPTING TO SETUP 
AND OPERATE YOUR ROTOTILLER.

FAILURE TO COMPLY WITH ALL SAFETY AND 
OPERATING INSTRUCTIONS CAN RESULT IN LOSS 
OF MACHINE CONTROL, SERIOUS PERSONAL 
INJURY TO YOU AND/OR BYSTANDERS, AND RISK 
OF EQUIPMENT AND PROPERTY DAMAGE. THE 
TRIANGLE IN THE TEXT SIGNIFIES IMPORTANT 
CAUTIONS OR WARNINGS WHICH MUST BE 
FOLLOWED.

CALIFORNIA PROPOSITION 65 WARNING
ENGINE EXHAUST FROM THIS PRODUCT 
CONTAINS CHEMICALS KNOWN TO THE STATE 
OF CALIFORNIA TO CAUSE CANCER, BIRTH 
DEFECTS, OR OTHER REPRODUCTIVE HARM.

DANGER

!

WARNING

!

WARNING INDICATES A SERIOUS INJURY OR FA-
TALITY COULD RESULT IF THE SAFETY INSTRUC-
TIONS THAT FOLLOW THIS SIGNAL WORD ARE 
NOT OBEYED.

IMPORTANT

IMPORTANT INDICATES HELPFUL INFORMATION 
FOR PROPER ASSEMBLY, OPERATION, OR 
MAINTENANCE OF YOUR EQUIPMENT.

DANGER INDICATES A SERIOUS INJURY OR FA-
TALITY WILL RESULT IF THE SAFETY INSTRUC-
TIONS THAT FOLLOW THIS SIGNAL WORD ARE 
NOT OBEYED.

Safety Rules

Not 

for  

Reproduction

Summary of Contents for 1695577

























Reviews: