4
TP-400-2561-00-IW-S
Handles and Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
985917
Apply adhesive to
secure grips.
Ref. 29 required on
slotted holes only.
Shift rod assembly
(Ref. 20) must pivot
freely on pivot blocks
(Ref. 14).
Slot in support (Ref. 56)
towards rear of unit.
Mount bushings
with flange on
inside of brackets.
Insert shift rod (Ref. 13)
into inner hole of Ref. 15.
Use washers to shim
gear (Ref. 54) as required
to insure proper adjustment.
Position in slots of frame to be sure hub of gear
(Ref. 56) is tight against the inside surface of the
gear support (Ref. 51).
Locate under rear hole of
gear support (Ref. 51) only.
Must pivot freely
on capscrew (Ref 34).
Apply lubricant as required.
Must slide freely in
dash assembly (Ref 24).
Apply lubricant as required.
1
2
3
4
3
1
2
3
3
49
5
38
6
35
7
37
36
23
24
26
27
28
29
39
40
41
46
47
48
50
17
51
22
52
53
25
54
55
57
47
58
60
61
62
22
42
45
47
56
25
59
59
54
25
8
9
10
11
13
12
11
10
12
28
24
21
14
8
16
14
17
19
10
11
22
18
7
14
15
20
25
30
31
32
34
33
36
44
16
22
43
The above parts group applies to the following Mfg. Nos.:
1693980
555M, 5HP Manual Start
1693981
555M, 5HP Manual Start (Exp.)
1693982
755M, 7HP Manual Start (Exp.)
1693983
755E, 7HP Electric Start
© Copyright 2001 Simplicity Manufacturing, Inc. All Rights Reserved.
