16
TP 400-2307-03-LW-S
Engine & Frame Group - 8HP, Manual Start
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
985634
Position idler pulley (Ref. 34) at
center of slot in clutch arm (Ref. 31).
Use 0-2
washers
between
Ref. 58 & 31
to assure a
centered
belt and no
interference
between
pulleys Ref.
27 & 34.
Long hub of idler pulley
(Ref. 27) to be toward
Hook one end of spring (Ref. 24)
into top hole of idler arm (Ref. 25)
and other end into top hole of the
pilot arm assembly in the traction
Torque to
10 - 12 ft. lbs.
Secure engine lead
wire for headlight to
oil filler tube.
Hook one end of spring
(Ref. 36) over clutch rod
assembly (Ref. 31)
between tabs and other
end into slot in frame.
Right rear bolt
Position belt stop (Ref. 42)
1/16 to 1/8 inch from belt
when auger clutch is
engaged.
idler arm (Ref. 25).
drive group.
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
57
58
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
44
43
21
42
21
21
28
57
57
30
56
32
33
The above parts group applies to the following Mfg. Nos.:
1693652
860DLX, 8HP Manual Start
1693653
860DLX, 8HP Manual Start (Export)
© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.
