Figure 5: Installing the Motherboard in a 4100ES Expansion Bay
Use the following procedure when installing motherboards in an expansion bay. Start with the second slot from the left and fill to the right.
1.
Orient the motherboard with the connector labeled J1 on the right and the header labeled P1 on the left.
2.
Attach four metal threaded standoffs and lockwashers into the screw holes on the chassis.
3.
Secure the motherboard to the standoffs using four #6 torx screws as shown in Figure 6.
page 6
579-221 Rev. F
4100-6038 Dual RS-232 Module Installation Instructions
