Assembly instructions for kit #14
6
This is not a Lego® product even if it contains Lego® bricks and plates. All warranties provided by Simple Motors.
LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this product.
All rights reserved. 2014 Simple Motors, LLC
♦
www.simplemotor.com
♦
11. Insert the batteries and briefly connect electromagnet wires to the battery holder wires. If
nothing happens switch the wires. With the correct connection electromagnet repels the
permanent magnets and the rotor stops in the position below. This is a perfect test for the
electromagnet and the magnets orientation: rotate rotor quarter turn four times – if all
permanent magnets are oriented properly rotor should always stay in the position shown.
12. After you found the correct connection trim red (positive) wire from the battery holder and
corresponding electromagnet wire. Remove the insulation from the wire tips and twist them
together. You may tack this connection under the battery holder.
