Assembly instructions for kit #14
1
This is not a Lego® product even if it contains Lego® bricks and plates. All warranties provided by Simple Motors.
LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this product.
All rights reserved. 2014 Simple Motors, LLC
♦
www.simplemotor.com
♦
Assembly Instructions: Kit #14
Rapid Assembly Advanced
QuikLock Reed Switch Motor
1. Insert the motor shaft through the holes in two 2x2 rotor pieces as shown*. Short end of
the shaft should stick out about 1/8” (3 mm) above the surface of the knobs.
